Overlap length of steel bars

Overlap length of steel bars

13 May,2024

The specification requirements for the length of the steel bar binding overlap shall not be less than 300mm. The minimum overlap length shall meet the specification requirements. According to the calculation of the overlap ratio, the vertical steel bar binding overlap position of the shear wall shall be turned up after the floor concrete of this floor is poured. Set steel joints about 1m apart. According to national standards, the overlap length of steel bars should be calculated according to the formula L=1.2d (1+λ)/α, where L is the overlap length, d is the diameter of the steel bar, λ is the length ratio of the stressed members, and α is the steel bar The ratio of tensile strength to the axial compressive strength of concrete.

MORE
The difference between steel coils and steel strips

The difference between steel coils and steel strips

13 May,2024

The difference between steel coils and steel strips mainly lies in their size and use. Steel coils usually refer to larger width coils, while steel strips refer to narrower coils and are used in specific processing areas.

MORE
Can steel plates and stainless steel be welded?

Can steel plates and stainless steel be welded?

13 May,2024

Steel plates and stainless steel can be welded. Before welding, it is necessary to use an angular grinding wheel to grind off the galvanized layer at the place to be welded.

MORE
The role of angle steel

The role of angle steel

13 May,2024

Angle steel is a versatile structural steel that is widely used in various fields.

MORE
Steel rod size standards

Steel rod size standards

13 May,2024

The size standards of steel rods cover steel rods of different shapes and sizes, including round steel, square steel, flat steel, hexagonal steel, octagonal steel, etc. These standards mainly involve cross-sectional shape, size, weight and allowable deviations, length and allowable deviations, and appearance.

MORE
Main components of steel plate

Main components of steel plate

13 May,2024

Chromium, copper, nickel and other alloying elements may also be added to the steel plate. These elements can improve the corrosion resistance and high-temperature strength of the steel plate. They are often used to manufacture steel plates in impact resistance, wear resistance, marine engineering, nuclear engineering and other fields.

MORE
< 12 >
WhatsApp +86-19016358231
Telephone Jason: +8619016358231
Email Jason: sales01@mingbaosteel.com
Submit Message
图片名称

WhatsApp

图片名称

WeChat

Copyright © 2024 Shandong Mingbao Metal Materials Co., Ltd.
Website design: 300.CN  jinan2   SEO      BUSINESS LICENSE   Privacy Policy